Jackson's : Wooden Panel : 39x39in (Approx. 100x100cm) : 20mm Deep

<p>Jackson's Wooden Panels are made of smooth, sanded light plywood, reinforced on the reverse with a wooden crossbar to help prevent warping. Sturdy yet lightweight, they are perfect for plein air painting projects and work in the studio.</p><p>These panels are made from wood and they are not supplied sealed. This means that liquids are absorbed into the surface and if they get too ‘wet’, there could be a swelling of the veneer. If the panel is to be used for painting then you should seal the surface with a quality glue size or an acrylic based primer. When you're applying acrylic gesso primer, avoid thinning it with water.</p><p>After sizing we recommend priming with acrylic gesso and sanding the surface to produce a smooth yet slightly absorbent surface.</p><p>Jackson's Wooden Panels can also be used for encaustic painting, or as a work support / drawing board.</p><p>Available in 20mm (approx. 3/4&quot;) and 50mm (approx. 2&quot;) deep profiles, in a wide range of sizes.</p><p><strong>Please note,</strong> as wood is a natural material, small cracks may occasionally develop on the surface. If present, sand the affected area smooth before applying a sealer or primer.</p>